Sony Remote Pre-Trigger Cable
Like all current pre-trigger cables, this is designed to keep a camera "awake," the same as pressing the camera's shutter button halfway down. For Plus, Plus II, MultiMAX without ACC ports and other PocketWizard radios.
Like all current pre-trigger cables, this is designed to keep a camera ""awake,"" the same as pressing the camera's shutter button halfway down. Keeping the camera in the "awake"mode shortens the button-press-to-shutter-release lag time dramatically. However, it will also use more of the camera's battery. A control box in the cable enables switching the pre-triggering mode On and Off.
For Plus, Plus II, MultiMAX without ACC ports and other PocketWizard radios.
Fits the following cameras: SONY A100, A200, A300, A350, A450, A500, A550, A580, A700, A850, A900, A33, A35, A37, A55, A65, A77, A99, Konica Minolta 5D, 7D, Konica Minolta Dimage A-1, A-2, A-200, Minolta Maxxum 7-Series and 9-Series SLR.
Sony/ Minolta motor drive connector to 1/8" (3.5 mm) Mono Miniphone Male with Pre-Trigger Switch. Cable length: 3' (91.5cm)
Length: 36 inches (91.5 cm)
Range - Performance / Basic Up to 500 meters (1600 feet)
Input-Output Connection : 3.5mm (1/8") stereo miniphone
jack, hot shoe
Triggering Speed: Up to 14.5 FPS
Voltage Present 84 volts, safe for use with all digital
and film cameras
Contact Time 143 milliseconds in normal operation
Power Two (2) AA (IEC: LR6) alkaline recommended
Battery Life Up to 50 hours (with alkaline batteries)
Mounting Hot shoe, lanyard/D-Ring loop, ¼-20 threaded